The AS7716-32X can be deployed as a TOR switch supporting 10/25/50 GbE to servers with 40/50/100 GbE uplinks, or as a spine switch supporting 40/50/100 GbE spine interconnects. These open network switches are loaded with the Open Network Install Environment (ONIE) which supports the installation of compatible Network Operating System software, including the open source options Open Network Linux and OpenSwitch, plus commercial NOS offerings.
•  Cost-effective, bare-metal switch infrastructure for data center fabric.
•  Deploy as Top-of-Rack switch supporting 10 or 25 GbE to servers, with 40 or 50 or 100 GbE uplinks.
•  Deploy as spine switch supporting 40, 50, or 100 GbE ToR and spine interconnects.
•  32 x QSFP28 switch ports, each supporting 1 x 100 GbE or 1 x 40 GBE, or via breakout cables, 2 x 50 GbE or 4 x 25 GbE or 4 x 10 GbE.
•  Layer 2 or Layer 3 forwarding of 3.2 Tbps (full duplex).
•  Supports hot/cold aisle with port-to-power and power-to-port airflow SKUs.
•  All ports on front; PSUs and fans accessible from rear.
•  Hot-swappable, load-sharing, redundant AC or -48V DC or 12V DC PSUs.
•  5+1 redundant, hot-swappable fan modules.
•  Energy Efficiency: 310 W typical power consumption without pluggable optics.
•  Bare-Metal hardware switch pre-loaded with diagnostics software and with Open Network Install Environment (ONIE) for automated loading of compatible open source and commerical NOS offerings.
32 x QSFP28 ports. Each Port supports 1×40/100 GbE or 2 x 50 GbE or 4 x 10/25 GbE per port using splitter cables.
Management ports on port side
1 x RJ-45 serial console
1 x RJ-45 100/1000BASE-T management
1 x USB Type A storage
Broadcom BCM56960 Tomahawk 3.2 Tbps.
No PHYs, No Retimers
Intel Xeon D-1518 quad-core 2.4 GHz
16 GB SO-DIMM DDR4 RAM
16 MB SPI Flash
8GB NAND Flash
32 GB M.2 SSD MLC
Jumbo frames support up to 9216 Bytes
Packet Buffer Size
16 MB integrated packet buffer
Subject to NOS
MAC Addresses: 8 K min./136 K max.
8 K min./72 K max. host entries, 16 K LPM entries with TCAM-only mode
4K /36 K max. host entries, IPv6/64 8 K TCAM-only mode
0oC to 45oC (32oF to 113oF)
-40oC to 70oC (-40oF to 158oF)
5% to 95% non-condensing
0 to 10,000 feet
Switch is loaded with Open Network Install Environment (ONIE) software installer
Compatible with the following NOS options:
Open Network Linux, the open-source, OCP reference NOS
QSFP 28 Port LEDs: Link Status, Activity, Rate
Ethernet Management Port LED: Link Status, Activity
Console Port LED: Link Status
System LEDs: Diagnostic, Locator, PSU and Fan Status
2 redundant, load-sharing, hot-swappable AC or -48 VDC
90 to 240 VAC at 50-60 Hz. -36 to -72 VDC.
Up to 93% for AC PSUs
Power input option
350 W, without pluggable optics
310 W, without pluggable optics
EMI : CE Mark, EN55022 Class A, EN55024, EN61000-3-2, EN61000-3-3
FCC Part 15 Subpart B Class A
VCCI Class A
Safety : CB, UL/CUL
Environmental: Temperature: IEC 68-2-14, Vibration: IEC 68-2-36, IEC 68-2-6, Shock: IEC 68-2-29, Drop: ISTA 2A, Acoustic Level: 62dB at 27oC
Item Dimension (L”xW”xH”)
|Dimensions||31.0723 × 21.7506 × 6.21446 in|
Only logged in customers who have purchased this product may leave a review.